Table of Contents
Advertisement
Chapter 4: Installing the Device in an Equipment Rack
Overview of Installing the Device in an Equipment Rack
You can install the device in a 19-inch equipment rack two ways. One way
is with the Rack Mount Kit that comes standard with the device. It includes
three connecting brackets; straight bracket, short L bracket, and long L
bracket and 10 screws (M4x6mm) that come with the switch. See
Figure 17. Refer to "19-Inch Rack Mount Kit" on page 45 to for the correct
set of holes to use for the device you are mounting.
Figure 17. Rack Mount Kit Brackets and Device
For installation instructions, refer to "Installing the Device in an Equipment
Rack with the Rack Mount Kit Brackets" on page 57.
55
Advertisement
Table of Contents
