Allied Telesis x320 Series Installation Manual page 44

Gigabit layer 3+ ethernet switches with external power supply unit
Table of Contents

Advertisement

Chapter 2: Beginning the Installation
41
Powered devices connected to the LAN ports on the switch should
be grounded to the same grounding conductor at the service
entrance as the switch.
LAN ports should have additional lightning protections as specified
in 803.3at Section 33.4.1.1.2, Environment B Requirements, when
connected to powered devices that are not grounded to the same
grounding conductor at the service entrance as the switch.
Warning
Switches should not be stacked on a table or desktop. They could
present a physical safety hazard if you need to move or replace
switches.  E91

Advertisement

Table of Contents
loading

This manual is also suitable for:

X320-10ghPwr300

Table of Contents