Figure 27: Sliding Out The Tray Of The Rkmt-J15; Figure 28: Placing A Device In The Rkmt-J15 Bracket - Allied Telesis x320 Series Installation Manual

3. Slide out the bracket tray. Refer to Figure 27.
Figure 27. Sliding Out the Tray of the RKMT-J15
4. Place the device in the left or right side of the bracket, with its front
panel facing the front of the bracket. If you are installing only one
device, you may install it on either the left or right side. Refer to
Figure 28.
Figure 28. Placing a Device in the RKMT-J15 Bracket
x320 Series Installation Guide
64