Allied Telesis x320 Series Installation Manual page 41

Gigabit layer 3+ ethernet switches with external power supply unit
Table of Contents

Advertisement

Warning
Reliable earthing of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than
direct connections to the branch circuits (e.g., use of power strips).
 E37
Warning
An operational unit can be hot. Exercise caution when handling with
unprotected hands.  E125
Warning
To reduce the risk of electric shock, do not route network cables from
PoE ports outside the building that houses this device.  E40
Caution
An Energy Hazard exists inside this equipment. Do not insert hands
or tools into open chassis slots or plugs.  E44
Warning
This equipment shall be installed in a Restricted Access location. 
E45
Caution
The unit does not contain serviceable components. Please return
damaged units for servicing.  E42
Warning
The temperature of an operational SFP or SFP+ transceiver may
exceed 70° C (158° F). Exercise caution when removing or handling
a transceiver with unprotected hands.  E43
Warning
Switches should not be stacked on a table or desktop. They could
present a physical safety hazard if you need to move or replace
switches.  E91
x320 Series Installation Guide
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

X320-10ghPwr300

Table of Contents