Configuring The Dm-F Profisafe And Integrating It Into The Fail-Safe Automation System Using Profibus/Profisafe Or Profinet/Profisafe - Siemens SIMOCODE pro Manual

Planning/Configuring
6.6 Configuring the DM-F PROFIsafe and integrating it into the fail-safe automation system using PROFIBUS/
PROFIsafe or PROFINET/PROFIsafe
6.6 Configuring the DM-F PROFIsafe and integrating it into the fail-safe
automation system using PROFIBUS/
PROFIsafe or PROFINET/PROFIsafe
Required manuals
Depending on the application, you need the following additional manuals to work with the
DM-F PROFIsafe fail-safe digital module:
● SIMOCODE pro – System Manual
(https://support.industry.siemens.com/cs/ww/en/view/109743957) including safety and
commissioning instructions for hazardous areas
● System manual SIMATIC Industrial Software Safety Engineering in SIMATIC S7
(http://support.automation.siemens.com/WW/view/en/12490443). This manual provides
you with
– An overview of the fail-safe S7 Distributed Safety and S7 F/H automation systems
– Information about the optimal fail-safe system for implementing a particular
● Manual SIMATIC S7 Industrial Software Distributed Safety - Configuring and
Programming. (http://support.automation.siemens.com/WW/view/en/22099875). This
manual describes
– How to configure the F-CPU and the F-I/O
– How to program the F-CPU in an F-FBD or an F-LAD
● Manual SIMATIC Industrial Software S7 F/FH Systems - Configuring and Programming.
(https://support.industry.siemens.com/cs/ww/en/view/109742100). This manual describes
– How to configure the F-CPU and the F-I/O
– How to program the F-CPU in a CFC.
● Manual SIMATIC Industrial Software SIMATIC Safety - Configuring and Programming
(https://support.industry.siemens.com/cs/ww/en/view/54110126). This manual describes
the use of the "STEP 7 Safety Advanced" and "STEP 7 Safety Basic" option packages.
46
automation task
SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002