Setting The Communication Function - Toho Electronics TRM-10C Instruction Manual

7.2.7 Setting the Communication Function

Set Protocol, Set Local Address, Baud Rate (communication speed), Data Length, Parity Bit, and
Stop Bit.
Example) Original protocol,Local Address: 02, Baud Rate: 1200bps, Data Length: 7 bit, Parity Bit:
even, Stop Bit: 2 bit
Display
(Protocol)
(Local address)
(Baud rate)
(Data length)
(Parity bit)
(Stop bit)
［Note］
In the case of "
Operation Keys
ENT
Enter the engineering mode (See the key operation
ENT
PRINT
in page 78).Use the △ key to indicate "
press the "ENT" key.
Use the △ key to display "
ENT
PRINT
the "ENT" key.（Select from "
"
ENT
PRINT
Use the △ key to indicate "
the "ENT" key. （Select from
PRINT ENT
Use the △ key to indicate "
ENT "ENT" key. （Select from 1200, 2400, 4800, 9600,
PRINT
19200, 38400）
Use the △ key to indicate "
PRINT ENT
"ENT" key. （Select from 7 bit, 8 bit）
ENT
Use the △ key to indicate "
PRINT
"ENT" key. (Select from EVEN, ODD and NONE）
Use the △ key to indicate "
"ENT" key. (Select from 1 bit, 2 bit)
Setting is completed.
Returned to the Communication Function Setting
screen.
Modbus-RTU）", Please set always the data length "
―88―
Description
Modbus-RTU）"）
", and press the
", and press the
", and press the
", and press the
HXPRM10mnCT002E
", and
", and press
Original）",
", and press
".