Toho Electronics TRM-10C Instruction Manual page 48

(2) Engineering list print stopping procedure
①Press the "PRINT" key.
②Use the "PRINT" key to display "
③Use the "PRINT" key to select "
print. Engineering list print is stopped. And the display returned to it was prior to starting
engineering list print.
RUN/STOP
Internal/External
Switch Set Value
: INT (key)
Alarm Hysteresis
Set Value
: ON
Temperature Unit :℃
". Pressing the "ENT" key stops engineering list
Channel Number /Tag
Number Set Value
: CH
ENGINEERING LIST
RUN CH／TAG ALM_PR
INT CH ON1
D_PR START INT
ON 00:00 1H
SYSC/ASYNC
ASYNC
PG_ADJ
Off
RUN.PRINT
SYNC
ALM_HYS TEMP
ON ℃
CH RJC μV(REFCH)
B.OUT OFFSET
FILTER
1 INT
ON 10.0
1.0000
2 EXT 805
ON 0.0
0.8000
COM_ADR 01
SPEED 9600BPS
DATA 8bit
PARITY NONE
STOP 1bit
DI 1:COMMENT1
2:MAN_PRINT
3:TIMEPRINT
Fig. 6.8 Engineering List Print
―47―
". Then, press the "ENT" key.
Alarm Print Set Value
: ON 1(occurrence/recovery)
Logging Print Set value:
ON/OFF,
Start Time, Interval,
Printout: Sync./ASync.,
PG_ADJ: ON/OFF
Logging Print: ON
Start: 00:00
Interval: 1h
Printout: ASync.
PG_ADJ: OFF
RUN.Print : Sync.
Setting of RJC, constant value in
external RJC, Burnout
Protection, Offset, and Digital
filter value for Each Channel.
1CH
RJC
REF
B.OUT
Offset
Filter
Communication Set value
2CH
: INT EXT
: None 805μV
: ON ON
: 10.0 0.0
: 1.0 0.8
DI Function Set
value.
Effective with the
DI option.
HXPRM10mnCT002E