Print Gap Correction On/Off; Record Start/End Print Off/Sync/Async - Toho Electronics TRM-10C Instruction Manual

(5) Print gap correction ON/OFF

Set print gap correction. As for this function, only DI asynchronous print, an asynchronous log print
are applied.
Example) When setting print gap correction to ON.
Display

(6) Record Start/End Print OFF/SYNC/ASYNC

Set Record Start/End print to OFF/Synchronous print/Asynchronous print.
Example) When setting Record Start/End print to asynchronous print.
Display
Operation keys
ENT
Enter the engineering mode (See the key operation
in page 78). Use the △ key to display
ENT
PRINT
"
Use the △ key to select "
ENT
PRINT
the "ENT" key.
Use the △ key to display "
ENT
PRINT
"ENT" key.
Setting is completed. Returned to the print gap
correction Setting screen.
Operation keys
ENT Enter the engineering mode (See the key operation
in page 78). Use the △ key to display
ENT
PRINT
"
Use the △ key to select "
ENT
PRINT
"ENT" key.
Use the △ key to display "
PRINT ENT
the "ENT" key.
Setting is completed. Returned to the Record start/
end print Setting screen.
―87―
Description
", and press the "ENT" key.
Description
", and press the "ENT" key.
HXPRM10mnCT002E
", and press
", and press the
", and press the
", and press