Temperture Unit; Point Calibration - Toho Electronics TRM-10C Instruction Manual

7.2.10 Temperature Unit
It changes the setting of a temperature unit.
Example) When setting a temperature unit to being Fahrenheit.
Display
［Note］
When changes temperature unit, all set up data (configuration) becomes initial.
7.2.11

Point Calibration

Calibrate a pen recording position.
Calibration of the zero point position
Calibration of the span point position
Example) When calibrate the zero point of 1 channel pen recording
Display
Operation keys
ENT Enter the engineering mode (See the key operation
in page 78). Use the △ key to indicate
ENT
PRINT
"
Use the △ key to select " ", and press the "ENT"
ENT
PRINT
key.
Setting is completed. Returned to the Temperature
Unit Setting screen.
Operation Keys
Enter the engineering mode (See the key operation
ENT
in page 78). Use the △ key to indicate
ENT
PRINT
"
Use the △ key to select "
ENT
PRINT
"ENT" key.
Use the △ key to select "
ENT
PRINT
"ENT" key.
The instrument starts to feed and trace the chart
PRINT
FEED
paper. With the △(left move) and
ENT
adjust the 0 mm position of the chart paper and the
recording position. Press the "ENT" key. Display
indicates the set counter value.
Setting is completed. Returned to the Zero Point
Calibration screen.
―90―
Description
", and press the "ENT" key.
Description
", and press the "ENT" key.
HXPRM10mnCT002E
", and press the
", and press the
(right move),