When The Chart Paper Is Not Fed At All; When The Chart Paper Is Not Fed Properly - Toho Electronics TRM-10C Instruction Manual

10.1.7 When the Chart Paper is not Fed at All

Flow chart 6
No chart paper feed at all
Chart paper fed by
FEED key?
ＮＯ
Chart holder
attached
properly?
ＮＯ
Set properly (See 5.1 on Page 25)

10.1.8 When the Chart Paper is not Fed Properly

Flow chart 7
Chart paper feed improper
Chart guide
attached
properly?
ＹＥＳ
Chart cover
locked properly?
ＹＥＳ
Chart paper set
properly?
ＹＥＳ
Used in adequate
environment?
ＹＥＳ
Contact our dealer where you
purchased the instrument, or our
sales representative.
ＹＥＳ
DI contact for
remote operation
OFF?
ＹＥＳ
Contact our dealer where you
purchased the instrument, or our
sales representative.
ＮＯ
ＮＯ
ＮＯ
ＮＯ
―115―
ＹＥＳ
ＮＯ
Attach properly
(See 5.1 on Page 25)
Attach properly
(See 5.1 on Page 25)
Attach properly
(See 5.1 on Page 25)
Secure an adequate
environment
(See 11.1.5 on Page 119)
HXPRM10mnCT002E
Change Chart speed.
Turn on the DI contact
(See 7.2.9 on Page
89)