List Print - Toho Electronics TRM-10C Instruction Manual

Hybrid pen type recorder
Hide thumbs Also See for TRM-10C:
Table of Contents

Advertisement

(2) Manual print stopping procedure
①Press the "PRINT" key.
②Use the "PRINT" key to display "
③Use the "PRINT" key to select "
However, print operation continues until the line is completed. Manual print is stopped. And the
display returned it was prior to starting manual print.
Mar.16.00 13:38
1:
2:
[Note]
No print as to the channel where digital print has been set to OFF.

6.4.2 List Print

Print the following set up data of the instrument on the paper:
Date/time/Chart speed/2nd chart speed
Channel number/range/tag/scaling value/engineering unit.
Setting alarm type
Comment/Others
(1) List print operating procedure
①Press the "PRINT" key.
②Use the "PRINT" key to display "
③Use the "PRINT" key to select "
Once list print starts, the display is automatically returned to the Data Display screen.
Upon termination of list print, it is returned to it was prior to starting list print.
[Note]
① Analog recording is continued while list print is running. Chart paper is fed forcibly.
② If an alarm is activated while list print is running, alarm print will be performed when list print
ended.
", and press the "ENT" key.
". Pressing the "ENT" key stops manual print.
23.3℃
22.992mV
Fig. 6.6 Manual Print
―44―
", and press the "ENT" key.
". Pressing the "ENT" key executes list print.
HXPRM10mnCT002E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRM-10C and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents