Setting The Date And Time - Toho Electronics TRM-10C Instruction Manual

［Note］
Restriction of printing
by chart speed
When the chart speed is 0 ㎜/h, it's printed with forcible chart feed. (When the chart speed is more
than 120 ㎜/h, not printing as shown the Table above.) List Print, Engineering List Print , Manual Print
(key), DI Comment print (Asynchronous) , DI Date and Time print (Asynchronous) , DI Manual print
(Asynchronous) , Logging print (Asynchronous) and Record Start/End print (Asynchronous.) is
printed regardless of the chart speed.
Restriction of printing

7.1.5 Setting the Date and Time

by chart speed
Setting Items
The following describes how to set the date/time of the internal clock.
When the chart speed is 0 ㎜/h, it's printed with forcible chart feed. (When the chart speed is more
Setting
than 120 ㎜/h, not printing as shown the Table above.) List Print, Engineering List Print and Manual
Print (key), is printed regardless of the chart speed.
Example) When setting the date and time to January 1st, 2000, 6:00.
Restriction of printing
by chart speed
Display
When the chart speed is 0 ㎜/h, it's printed with forcible chart feed. (When the chart speed is more
than 120 ㎜/h, not printing as shown the Table above.) List Print, Engineering List Print and Manual
Print (key), is printed regardless of the chart speed.
Restriction of printing
by chart speed
When the chart speed is 0 ㎜/h, it's printed with forcible chart feed. (When the chart speed is more
than 120 ㎜/h, not printing as shown the Table above.) List Print, Engineering List Print and Manual
Print (key), is printed regardless of the chart speed.
［Note］
If you enter a non-existent dates or time, indicates an error
Press the ENT key and re-enter a correct numeral.
Print type
Alarm occurrence print, Alarm recovery print, Affix print,
DI Comment print (Synchronous), DI Date and Time print
(Synchronous), DI Manual print (Synchronous), Record
Start Print(Synchronous.)
Logging print (Synchronous)
Year Month, Day
Operation Keys
ESC
3 sec
MENU Hold down the "MENU" key for 3 seconds or more
to enter the setup mode. Use the △ key to indicate
ENT
PRINT
"
PRINT
FEED Set the year. Use the △ key to select a numeral,
ENT
and use the
Press the "ENT" key.
PRINT
FEED
Set the month and day.
ENT
Operate in the same manner as setting the year.
PRINT Set the time (hours and minutes).
FEED
ENT
Operate in the same manner as setting the year.
Press the "ENT" key. To return to the user mode,
ENT
hold down the "MENU" key for 3 seconds or more.
―70―
Chart speed（㎜/h）
５～１００（㎜/h）
１０～１００（㎜/h）
Time
Description
", and press the "ENT" key.
key to shift a digit.
.
HXPRM10mnCT002E