Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS XG 3D / Ceph
E
H
I
J
K
63 03 452 D3352
D3352.031.05.08.02 10.2015
4. Use the 4 screws (A) to fasten the assembled housing cover to the
unit.
F
A
For installation with floor stand only:
5.
the base plate. The two covers (F) and (G) must hold together after
they have been attached.
6. Screw holder (H) to the column with screw (I).
7. Clip on the profile (K).
8. NOTICE! Make sure that intermediate piece (J) lies flush on the stand
surface.
Insert intermediate piece (J) in the gap.
11.2
Inserting the forehead and temple supports
➢ Insert the forehead and temple supports until they lock in place.
11.2 Inserting the forehead and temple supports
Place the four spring clips (E) on
11 Initial startup
G
97