3Select Parameters - Sirona Orthophos XG 3D/Ceph Installation Manual

11 Initial startup
11.10 Service routines for startup
Example
128
 Following this double selection and confirmation via the Service
key, the service routine is activated.
11.10.2.3 Select parameters
If arrow keys are displayed in the selection fields once the required
Select parameter XG 3D / XG 3D ready / GALILEOS
service routine has been selected, you can use these arrow keys to
choose between different parameters.
You want to run service routine S017.6 to activate the remote control.
✔
Once you have selected service routine S017.6, the code "00" is pre-
selected for the "Remote control disabled" option.
➢ Touch the + or - arrow keys (A) to select the code 01 (B) for the
"Remote control enabled" option.
 Once the selected parameter has been changed (in this case the
code for the activation of the remote control), the Memory key (C)
lights up.
Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS XG 3D / Ceph
D3352.031.05.08.02 10.2015
63 03 452 D3352