Creating A 3D Test Image - Sirona Orthophos XG 3D/Ceph Installation Manual

11 Initial startup
11.8 Checking the data paths
118
11.8.2

Creating a 3D test image

✔
"Test exposures/test images"
The
1. In the structure tree, under
image Sensor"
 The menu for creating the test image for the 3D sensor appears
in the action window.
2. Click on the
 The exposure window opens in SIDEXIS XG. It indicates the
current status of exposure readiness.
3. Press the release button. Press and hold down the button until the
exposure is complete, the preview image is displayed in the exposure
window, and the acoustic signal that indicates the end of the
exposure (double beep) sounds (if it has been configured).
 The test image appears in the exposure window.
Installation Manual ORTHOPHOS XG 3D / Ceph
menu is called [ → 116].
"Test exposures 3D"
element.
"Image acquisition"
button to create the test image.
Sirona Dental Systems GmbH
"Test
, select the
63 03 452 D3352
D3352.031.05.08.02 10.2015