Checking And Adjusting The Touchscreen - Sirona Orthophos XG 3D/Ceph Installation Manual

Sirona Dental Systems GmbH
Installation Manual ORTHOPHOS XG 3D / Ceph
A
T R
63 03 452 D3352
D3352.031.05.08.02 10.2015
13.3

Checking and adjusting the touchscreen

1. Switch the unit on.
 Once the unit software has started up, the start screen is
displayed on the touchscreen.
2. As soon as the start screen appears, press the 3 keys light localizer,
T, and R simultaneously (see (A)).
IMPORTANT: These keys must be pressed while the unit is booting
and the start screen is still displayed.
 The first adjustment screen appears on the display.
 You can abort the adjustment procedure at any time by pressing
"Abort"
the
3. Touch the top left corner of the screen.
 The second adjustment screen appears on the display.
4. Touch the bottom right corner of the screen.
 The third adjustment screen appears on the display.
5. Touch the center of the green square in the top right corner of the
screen.
IMPORTANT: Touch the green squares as close to the center as
possible so that the black dots that then appear will be positioned
exactly in the center of the squares.
 The fourth adjustment screen appears on the display.
13 Adjusting and calibrating the unit
13.3 Checking and adjusting the touchscreen
button.
259