Table of Contents
Advertisement
Menu
9. Oil Data
Current Batch Resets
By Clean-Out Mode
Description
• Number of days with data included in totals.
• Number of monitored heat-ups.
• Number of slow heat-ups.
• Max time to heat 270°F to 310°F.
• Lowest "peak rate' of all heat-ups.
• Maximum voltage.
• Minimum voltage.
• No. of "low voltage" warnings generated.
• Maximum amp draw.
• Minimum amp draw.
• Number of "low amps" warnings.
• Non-cooking time (hrs) while fryer was on.
• Total oil wear accumulated.
• Total number of cook cycles.
• Number of cook cycles started before ready.
• No. cook cycles quit early, 0:11 or more rem.
• No. cook cycles beeped *DONE* 0:21 or more
after.
• Individual product cook counts.
• Individual product "not detected" counts.
• Individual product "slow cook" counts.
• Individual product "overloaded".
I I N N F F O O : During steps 8V through 8Y, press the
product buttons (or Manual program button) to see
data on individual product items.
2 2 . . Press the program button to continue onto Oil Data
log.
1 1 . . Press the down button to step through the following
data, see
Table 6-7 Oil Data , page
• The day current batch of oil was started.
• Number of days with data included in totals.
65:
53
Advertisement
Table of Contents
