Table of Contents
Advertisement
Mode
T T - - 1 1 9 9
T T - - 2 2 0 0
100
Provides
Operation and
Amps Calibrate
0 0 0
(inputs)
Do Total
INIT
Initialization
Description
Display
Electric: The amp sen-
sors monitor the cur-
rent (amperes) in the
heating elements. In
the Open Fryer, each
amps reading corre-
sponds directly to the
current in one of the
heating element coils.
Consequently, the
amps readings here
will not match an amps
readings on the line
cord wires, since each
phase on the line cord
normally drives two el-
ements (120° out of
phase).
This step allows all pro-
grammable settings
and all statistics and
event logs to be initial-
ized to factory preset
values.
To totally initialize the
controller—Including
all cook settings—back
to factory default val-
ues, press and hold the
DOWN button for about
2 seconds.
Calibration data will not
be affected by this initi-
alization, unless values
are found to be outside
of acceptable limits.
I I N N F F O O : Statistics val-
ues, the E-Log, Oil
Wear, etc., will be reset
by this total initializa-
tion. All of the operating
history data will be lost.
For this reason, the
normal Init step in Spe-
cial Program mode is
Advertisement
Table of Contents
