Table of Contents
Advertisement
Menu
22. Activity Log
23. Secondary
CNTS
24. Ver. & Source
25. USB Settings
26. Radio Info
Description
change. FLTRS=X tracks how many filters have
been performed since the last filter change.
4 4 . . Press the program button to continue onto Activity
Log.
This step for internal use.
Press the program button to continue.
Counts each time secondary contactor is energized.
Press the program button to continue.
This step for internal use.
Press the program button to continue.
Transfer reports to USB, and product settings to and from
USB.
1 1 . . PRINT REPORT: Press the program button to choose
between the following reports: NORMAL, ACTIVITY, ALL,
STATS, SET+STATS, STATS. Once the report is selected,
press the right timer button and the report will be added to
the USB. IF no USB is available "NO DRIVE" is displayed. A
USB will need to be inserted into the USB port. Use a Phillips
head screwdriver to open the USB access panel, then insert
Figure 3-2 Operating Components , page 11
the USB. See
USB location.
2 2 . . READ SP FROM USB: Uploads set points from the USB to
the control. The set point file needs to be formatted correctly
otherwise UNKNOWN displays. Press the left timer to upload
the set point file
3 3 . . UNMOUNT USB: Press the left timer button to safely remove
the USB without risk of losing data. A 60 second timer is
given when it is safe to remove the USB.
4 4 . . SAVE SP TO USB: Press the left timer to download the
setpoint file from the control to the USB.
Press the program button to continue.
Wi-Fi set up mode for future use.
for
59
Advertisement
Table of Contents
