Table of Contents
Advertisement
Menu
7. Prev-Day-Sun
Description
• Lowest "peak rate" for today's heat-ups.
• Maximum voltage today (when fryer on).
• Minimum voltage today (when fryer on).
• No. of "low voltage" warnings generated.
• Maximum amp draw today.
• Minimum amp draw today.
• Number of "low amps" warnings today.
• Non-cooking time (hh:mm) fryer was on.
• Oil wear accumulated so far today.
• Total number of cook cycles today.
• Number of cook cycles started before ready.
• No. cook cycles quit early, 0:11 or more rem.
• No. cook cycles beeped *DONE* 0:21 or more
after.
• Individual product cook counts.
• Individual product "not detected" counts.
• Individual product "slow cook" counts.
• Individual product "overloaded".
2 2 . . During steps 6V through 6Y, press the product
buttons (or manual Program button) to see data on
individual product items.
3 3 . . Press the program button to continue onto Prev-Day-
Sun log.
1 1 . . Press the down button to steps through the following
data, see
Table 6-5 Prev-Day-Sun , page
• Day this data was recorded for.
• Time of day last heat-up was completed.
• Peak heat-up rate (°F/Sec) for last heat-up.
• Was that day's last heat-up acceptable?
• Heat Cap. status (based on last 4 heat-ups).
• Number of monitored heat-ups that day.
63):
51
Advertisement
Table of Contents
