Table of Contents
Advertisement
Menu Step
•
"D5: POSSIBLE" "D5: OVERSIZED" "D5: OR FROZEN" "D5: BATCH
OF" "D5: (Product Name)" "D5: DETECTED" "D5: 5 TIMES" "D5:
TODAY".
D6: "Cooked
This section shows how many cook cycles were started before the READY
Before Ready"
light was on. This is strictly a user error. If the fryer was in the ready range
Report
when the user begins to load product, but is out of the ready range by the
time the cook cycle is started, the control will not give you an alarm. The
D6: "Cooked Before Ready" Report contains the following information:
•
If the fryer wasn't ready before loading, an alarm sounds and "WAS
NOT READY" warning is generated. The number of times this has
happened today is indicated by the following report item: "D6:
COOKED" "D6: BEFORE READY" "D6: 11 TIMES" "D6: TODAY".
Press the down button.
•
The number of "WAS NOT READY" warnings for this batch of oil is
also reported. Note that this value does not yet include the not ready
warnings generated today. "D6: BEFORE TODAY," "D6: COOKED"
"D6: BEFORE READY" "D6: 8 TIMES" "D6: ON THIS OIL". Press the
down button.
•
Finally, the controller identifies how many times the not ready warning
was generated for the previous batch of oil: "D6: LAST OIL," "D6:
COOKED" "D6: BEFORE READY" "D6: 24 TIMES"
D7: "Stopped
This section shows how many cook cycles were stopped early by the user,
Too Soon"
before the cook timer had counted down to "0:00" and the "*DONE*" was
Report
displayed. This is a user error. cook cycles that are canceled after cooking
for less than 30 seconds are not counted here. For example, if a cook
cycle is accidentally started, and the cook cycle is canceled after just a
few seconds, this cook cycle will not be counted as a "Stopped Too Soon"
cook cycle.
Also, some allowance is given for stopping a cook cycle a little early. The
user can cancel the cook cycle up to 10 seconds early without penalty.
Otherwise, however, any cook cycle that was stopped with more than 10
seconds remaining (0:10) on the cook clock with be counted as a
"STOPPED TOO SOON" cook cycle. The D7: "Stopped Too Soon" Report
contains the following information:
•
The first item displays what percent of cook cycles today were stopped
with more than 0:10 remaining. All products are grouped into one
count. "D7: 8% OF LOADS" "D7: WERE STOPPED" "D7: TOO SOON"
"D7: TODAY". Press the down button.
Description
73
Advertisement
Table of Contents
