• Draw a mark (2) on the left and right side of the upper heating element 3 1/8 inches
forward of the rear of the heating element.
• Draw a mark (3) on the right front side of the upper heating element 4 1/2 inches rear
of the connector flange.
• Draw a mark (4) on the right front side of the upper heating element 4 inches rear of
the connector flange.
Position one high limit clip (1) on the top front right side of both heating
3 3 ) )
elements, see
124
5 inches from connector
1
flange
3.125 inches from rear of
2
heating element
Figure 9-5 Marking the Upper heating Element
Figure 9-6 High Limit Clip and Clamp Install , page
4.5 inches from connector
3
flange
4 inches from connector
4
flange
125.