Table of Contents
Advertisement
Menu
11. Input Info
INP A_VHDSF_M
Description
• Number of slow heat-ups.
• Max time to heat 270°F to 310°F.
• Lowest "peak rate' of all heat-ups.
• Maximum voltage.
• Minimum voltage.
• No. of "low voltage" warnings generated.
• Maximum amp draw.
• Minimum amp draw.
• Number of "low amps" warnings.
• Non-cooking time (hrs) while fryer was on.
• Total oil wear accumulated.
• Total number of cook cycles.
• Number of cook cycles started before ready.
• No. cook cycles quit early, 0:11 or more rem.
• No. cook cycles beeped *DONE* 0:21 or more
after.
• Individual product cook counts.
• Individual product "not detected" counts.
• Individual product "slow cook" counts.
• Individual product "overloaded".
I I N N F F O O : During steps 10V through 10Y, press the
product buttons (or Manual program button) to see
data on individual product items.
2 2 . . Press the program button to continue onto Input Info
check.
This mode displays the status of components and inputs. if
the input signal is detected, an identifying letter is
displayed (see below). If the signal is not detected, "_" is
displayed.
1 1 . . With the power switch turned to on, and all inputs
detected, "H_P_A_VHDSF_M" shows in the display.
See below for "definition" of codes.
55
Advertisement
Table of Contents
