Table of Contents
Advertisement
Menu Step
D8: "Beeped
*DONE* Too
Long" Report
74
•
The number of Stopped Too Soon cook cycles for this batch of oil is
reported next. Note that this value does not yet include the cook cycles
from today. "D7: BEFORE TODAY" "D7: 3% OF LOADS" "D7: WERE
STOPPED" "D7: TOO SOON" "D7: ON THIS OIL". Press the down
button.
•
Finally, the controller identifies percentage of Stopped Too Soon cook
cycles for the previous batch of oil: "D7: LAST OIL" "D7: 5% OF
LOADS" "D7: WERE STOPPED" "D7: TOO SOON".
Diagnostic Report section 8 reveals how many cook cycles beeped
"*DONE*" for more than 20 seconds before the user pressed the timer but-
ton to stop the cook cycle. This is strictly a user error. The controller can-
not detect when the product is actually removed from the fryer. It only
identifies how long the controller beeped "*DONE*" before the user
pressed the timer button to stop the alarm. The D8: "Beeped *DONE* Too
Long" Report contains the following information:
•
The first item displays the percent of today's cook cycles that beeped
"*DONE*" for more than 20 seconds before the user pressed the timer
button to stop it. All products are grouped into one count. "D8: 10% OF
LOADS" "D8: BEEPED 'DONE'" "D8: TOO LONG" "D8: TODAY".
Press the down arrow.
•
The number of Beeped 'DONE' Too Long cook cycles for this batch of
oil is reported next. Note that this value does not yet include the cook
cycles from today. "D8: BEFORE TODAY" "D8: 7% OF LOADS" "D8:
BEEPED 'DONE'" "D8: TOO LONG" "D8: ON THIS OIL". Press the
down button.
•
Finally, the controller identifies percentage of Beeped 'DONE' Too
Long cook cycles for the previous batch of oil: "D8: LAST OIL" "D8: 6%
OF LOADS" "D8: BEEPED 'DONE" "D8: TOO LONG"
Description
Advertisement
Table of Contents
