Cut The Character - MUTOH ValueCut II VC2-600 User Manual

ValueCut USER MANUAL
Advanced tab
Set up applicative cutting job.
Let's try to cut.
Set somewhere around A3 size sheet sideways to the ValueCut.

8.8 Cut the Character

Execute cutting job in the Cut/Plot window with each of the tabs as follows:
2
3
VC2E-A-00
1
FlexiSTARTER Quick Start Guide
1. Click on
the ValueCut may appear.
2. Select "Send now" in the Send mode.
3. Select copies falling within the media
size. This time, three sheets are applied.
91
, then media size loaded to