MUTOH ValueCut II VC2-600 User Manual page 17

ValueCut USER MANUAL
Please pay attention to the direction of the base beam (the wheel on the front end of the beam comes
with a break while the rear one is on its own).
Front
Figure2-2
Step 3
Place the stand beam upright on the T-stand and follow number (1) (2) to assemble (See Figure 2-4 &
2-5). There is hexagon socket head screws fasten on the T-stand on both side taken as locating pins.
VC2E-A-00
(1) T-Stand
(2) Stand beam
Figure 2-4
Figure2-3
17
Installation
Rear
Figure 2-5