Appendix
9.3 About the Tool
A generic term referring to the blade that cuts the sheet, the pen that does plotting, and the LED
bombsight (option) used for pointing to the reference point.
OFFSET is the distance that the blade tip is displaced from the centerline of the blade.
Protrusion Length of the Blade
Protrusion length of
the blade
Thickness of the
base paper (t2)
Length of protrusion = t1 + t 2/ 2, but for your convenience you may just make it about 0.3 mm ~
0.5 mm beyond the blade holder tip.
Blade tip
Central line
Offset
108
ValueCut USER MANUAL
Blade
Thickness of the
media (t1)
VC2E-A-00