ValueCut USER MANUAL
9.2 Blade Specification
For cutting thick fluorescent and window tint film. Also for cutting detailed
work in standard vinyl.
The blade is 45° with Red Cap, 0.25 mm offset and
2.5 mm blade diameter.
For cutting reflective vinyl, cardboard, sandblast, flock, and stencil sharp
edge.
The blade is 60° with Green Cap, 0.50 mm blade offset and
2.5 mm blade diameter.
For cutting thin sandblast mask and stencil. The blade with sharp angle
and special design, allowing it to maneuver around sharp corners.
The blade is 60° with Blue Cap, 0.25 mm blade offset and
2.5 mm blade diameter.
For Cutting small text and fine detail. Sharp blade with smallest offset.
The blade is 50° with Black Cap, 0.175 mm blade offset and
2.5 mm blade diameter.
For thin and delicate media such as window tint
The blade is 25° with Yellow Cap, 0.25 mm blade offset and
2.5 mm blade diameter.
VC2E-A-00
107
Appendix