Add Device By Using The Production Manager - MUTOH ValueCut II VC2-600 User Manual

ValueCut USER MANUAL

8.4 Add Device by Using the Production Manager

When the Production Manager starts up for the first time after the installation of the program, the Add
Setup window appears as the diagram below. This screen enables you to set up device of the ValueCut.
Note: "USB_Printer_0" will not be displayed if the plotter is not connected with USB cable.
VC2E-A-00
1 You can see "Mutoh" selected in the box saying
"What is the brand name of your vinyl cutter?"
2 Select a model of the ValueCut you have in the
1
box saying "What is the model name of your
Mutoh?"
2
3 The right screen may appear after you press
3
4 Leave default in the box saying "What do you want
to call your new setup?" unless you intend to
4
customize it.
5 After clicking on
5 "USB_Printer_0" from the pull-down menu in the box
saying "How is your ValueCut VC-1300 connected to
your computer?"
6 "ValueCut" may be added in the screen of the
6
Production Manager after you press
83
FlexiSTARTER Quick Start Guide
.
dextrally, select
.