MUTOH ValueCut II VC2-600 User Manual page 64

Automatic Aligning System
The figure below illustrates how the registration marks are added to your graphic on the media.

The AAS Layout Instruction:
* Auto-detection function on the 1

Suggested 30 mm margin on both left and right sides of media sheet.

To prevent media sheet from dropping or avoid any error while media sizing, it is
recommended to add 20 - 30 mm margin on the bottom of the media sheet and at
least 50 mm margin on the top.
st
mark covers the grey area
64
ValueCut USER MANUAL
VC2E-A-00