Contour Cutting - MUTOH ValueCut II VC2-600 User Manual

ValueCut USER MANUAL

5.5 Contour Cutting

For accurate contour cutting with AAS function, please proceed the following steps:
Step 1
Using FlexiSTARTER supplied with your ValueCut or a cutting software compatible with ValueCut, create
a contour cutting job file and add registration marks described on 5.2.3.
Note:
To create a contour cutting job file using FlexiSTARTER, see 8. FlexiSTARTER Quick Start
Guide. If you are using other software, please refer to the user guide of the software.
VC2E-A-00
63
Automatic Aligning System