Cleaning The Grid Drum; Cleaning The Pinch Rollers - MUTOH ValueCut II VC2-600 User Manual

Maintenance

6.2 Cleaning the Grid Drum

1. Turn off the cutting plotter, and move the tool carriage away from the area needed to be cleaned.
2. Raise the pinch rollers and move them away from the grid drum for cleaning.
3. Use a bristle brush (a toothbrush is acceptable) to remove dust from the drum surface. Rotate the
drum manually while cleaning. (Refer to Figure 6-1)

6.3 Cleaning the Pinch Rollers

1. If the pinch rollers require a thorough cleaning, use a lint-free cloth or cotton swab to wipe away the
accumulated dust from the rubber portion of the pinch rollers. To prevent the pinch rollers from
rotating while cleaning, use your finger to hold the pinch rollers to prevent them from rotation.
2. To remove the deeply-embedded or persistent dust, use the lint-free cloth or cotton swab moistened
Note:
with rubbing alcohol.
The daily maintenance of your cutting plotter is very important. Be sure to clean up the grid drum and
pinch rollers regularly for better cutting accuracy and output quality.
Figure 6-1
68
ValueCut USER MANUAL
VC2E-A-00