How To Change The Pen Up Speed - MUTOH ValueCut II VC2-600 User Manual

ValueCut USER MANUAL
Check the length of the USB cable.
Is the USB cable too long?
Use the cable less than 3 m.
Check the setting of the serial port.
Flexi and plotters have to match the communication setting.
Check the Communications setup.
Refer to the 8.4 Add Device by Using the Production Manager

8.12.2 How to change the pen up speed

Change the pen up speed with the Control Panel of the plotter.
Refer to the 3.4 Menu
VC2E-A-00
Items.
FlexiSTARTER Quick Start Guide
and 3.4 Menu
105
Items.