Create A Cut Contour Mark - MUTOH ValueCut II VC2-600 User Manual

FlexiSTARTER Quick Start Guide

8.9.5 Create a cut contour mark

In the aftermath of "8.9.3. Create data of the contour cut line" on the previous page, this is how to create
a contour cut mark.
3
f
1
2
3.
a.
b.
leave "0".
c.
a
d.
b
e.
c
time.
f.
d
g.
e
g
1. Select "Contour Cut Mark" from the
Effects menu.
"If "Contour Cut Mark" is not active
from the Effects menu, select the
contour.
2. The contour cut mark may be created.
Assign a kind of the mark from the
Design Central window. This time, Mutoh
4 Point Positioning is applied.
Set up in the Design Central window as follows:
Select "Mutoh 4 Point Positioning".
Set up length from the object to the mark. Generally,
Set up copies horizontal direction. "1"
Set up copies vertical direction. "1"
Set up a interval of the copies. It's not necessary for this
Select the contour cut mark size. (10mm - 25mm)
Click on to confirm the cut contour mark.
96
ValueCut USER MANUAL
VC2E-A-00