FlexiSTARTER Quick Start Guide
Advanced tab
Set up applicative cutting job.
Let's try to cut.
Set somewhere around A3 size sheet sideways to the ValueCut. Refer to the ValueCut manual about
how to load a sheet.
8.8 Cut the Character
Execute cutting job in the Cut/Plot window with each of the tabs as follows:
2
3
1
1.
Click on
the ValueCut may appear.
2.
Select "Send now" in the Send mode.
3.
Select copies falling within the media
size. This time, three sheets are applied.
80
ValueCut USER MANUAL
, then media size loaded to
V5a 2015 Jan