ValueCut USER MANUAL
8.10 Cut Contour
8.10.1 Image Print
Print on a printer registered in a computer from the FlexiSTARTER ValueCut Edition. Select "Print..."
from the File menu and print cutting data of the cut contour. As to the printing procedure, refer to the
printer manual you use.
8.10.2 Cut contour window
Select "Cut Contour" from the File menu, then the Cut Contour window may open.
It has three tabs.
General tab
Set up:
Material size
Position
Option tab
Set up a cutting of the ValueCut like the driver options.
Advanced tab
Set up applicative cutting job.
VC2E-A-00
FlexiSTARTER Quick Start Guide
97