Initial Printing Supplies Installation; Recording Paper Installation (Recording Paper Tray) - Toshiba DP80F Operator's Manual

- INITIAL PRINTING SUPPLIES INSTALLATION

Recording Paper Installation (Recording Paper Tray)

About Recording Paper: About Paper Sizes:
• Use only recommended pa- •
per brands to optimize your
facsimile performance. Con-
tact your authorized TOSHI-
BA dealer for more informa-
tion.
• Remove the recording paper
when storing or relocating
your facsimile. •
• Avoid using damaged, folded
or misaligned recording pa-
per. Use of damaged paper
could cause double feeding
or paper jamming. •
• Use of damp recording paper
will cause poor printing over
all or part of the image area.
If the paper is excessively
moist, print quality may be-
come uneven and voiding
may occur. Replace the pa-
per, should this condition ex-
ist.
• Do not add paper on top of
the paper already in the ma-
chine. If you wish to add pa-
per, first remove the existing
paper. Then stack the exist-
ing paper with the new paper
before inserting into the ma-
chine.
20
1
Pull Up the
Your TOSHIBA facsimile has
Document Exit Tray
been preset to accept letter
size recording paper.
In the event that you receive
a legal-size (8.5"x14") recep-
tion, it will automatically be
reduced to fit onto letter-size
(8.5"x11") paper.
If you receive only legal-
size receptions and do not
wish them to be automati-
cally reduced: Load the le-
Pull up the Document Exit Tray.
gal-size paper in the tray.
If you raise the tray high
If you receive a mixture of
enough, it will latch onto the un-
letter and legal-size recep-
derside of the Operation Panel.
tions, and you do not wish
your legal receptions to be
CAUTION:
automatically reduced:
• Do not place heavy objects
Add an optional recording
on the Document Exit Tray
paper tray to support both
or apply strong force.
letter and legal-size paper.
With the second recording
paper tray, your TOSHIBA
facsimile will automatically
select the appropriate paper
size to match the pages you
receive.
2
Remove the Bypass
Tray
25 30
Remove the Bypass Tray from
Recording Paper Tray.
3
Open the Paper
Guides
31
Open the Paper Guides.