Disposal - Danfoss VLT AutomationDrive FC 302 Operating Manual

Operating Guide | VLT® AutomationDrive FC 302
More approvals and certifications are available. Contact the local Danfoss office or partner. Drives of voltage T7 (525–690 V) are UL
certified for only 525–600 V.
Thermal memory retention requirement
The drive complies with UL 61800-5-1 thermal memory retention requirements. For more information, refer to the Motor Thermal
Protection section in the product-specific design guide.
OUTPUT FREQUENCY LIMIT
From software version 6.72 onwards, the output frequency of the drive is limited to 590 Hz due to export control regulations.
Software versions 6.xx also limit the maximum output frequency to 590 Hz, but these versions cannot be flashed, that is,
neither downgraded nor upgraded.
ADN-compliance
For more information on compliance with the European Agreement concerning International Carriage of Dangerous Goods by Inland
Waterways (ADN), refer to the ADN-compliant Installation section in the product-specific design guide.

1.6 Disposal

Do not dispose of equipment containing electrical components together with domestic waste. Collect it separately in accordance with
applicable local regulations.
8 | Danfoss A/S © 2019.12
N O T I C E
Introduction
AQ275652476278en-000101 / 130R0709