Wiring Configuration Examples; Application Examples; Programming A Closed-Loop Drive System - Danfoss VLT AutomationDrive FC 302 Operating Manual

Operating Guide | VLT® AutomationDrive FC 302

7 Wiring Configuration Examples

7.1 Application Examples

The examples in this section are intended as a quick reference for common applications.
• Parameter settings are the regional default values unless otherwise indicated (selected in parameter 0-03 Regional Settings).
• Parameters associated with the terminals and their settings are shown next to the drawings.
• Required switch settings for analog terminals A53 or A54 are also shown.

7.1.1 Programming a Closed-loop Drive System

A closed-loop drive system usually consists of:
• Motor.
• Drive.
• Encoder (as feedback system).
• Mechanical brake.
• Brake resistor (for dynamic braking).
• Transmission.
• Gear box.
• Load.
Applications demanding mechanical brake control typically need a brake resistor.
74 | Danfoss A/S © 2019.12
Wiring Configuration Examples
AQ275652476278en-000101 / 130R0709