Local Control Panel (Lcp) - Danfoss VLT AutomationDrive FC 302 Operating Manual

Operating Guide | VLT® AutomationDrive FC 302
5 Cable/EMC clamps
7 Control card (underneath LCP and control terminals)
9 USB port
11 Analog input/output terminals (see
13 Power card (underneath the control shelf )
Illustration 4: View of Control Shelf

3.6 Local Control Panel (LCP)

Status
A1.1
0 RPM 0.00 A
A1.2
0.0 Hz
Off Remote
B1
Quick
Status
Menu
B2
C1
On
D1
Warn.
D2
Alarm
D3
Hand
E1
Off
On
E2
Illustration 5: Graphical Local Control Panel (LCP)
The local control panel (LCP) is the combined display and keypad on the front of the drive. The LCP is used to:
• Control the drive and motor.
• Access drive parameters and program the drive.
• Display operational data, drive status, and warnings.
A numeric local control panel (NLCP) is available as an option. The NLCP operates in a manner similar to the LCP, but there are
differences. For details on how to use the NLCP, see the product-specific programming guide.
Danfoss A/S © 2019.12
table 12)
1(1)
A1.3
0.00 kW
A2
0.0 %
A3
Stop
B4
Main Alarm
Menu Log
B3
C2
C3
OK
C4
C5
Auto
E3
Reset
On
E4
6 Relay 1 and relay 2 (see 5.11.4 Relay
8 Control shelf
10 Analog input switches A53/A54 (see
Voltage/Current Input Signal)
12 Brake resistor terminals, 104–106 (on power card
underneath control shelf )
AQ275652476278en-000101 / 130R0709| 17
Product Overview
Terminals)
5.11.13 Selecting the