Control Terminal Types - Danfoss VLT AutomationDrive FC 302 Operating Manual

Operating Guide | VLT® AutomationDrive FC 302

5.11.3 Control Terminal Types

Illustration 33: Control Terminal Locations
1
61 68 69
2
12 13 18 19 27 29 32 33 20 37
3
1 Serial communication terminals
3 Analog input/output terminals
Illustration 34: Terminal Numbers Located on the Connectors
Table 10: Serial Communication Terminals
Terminal Parameter
61 –
68 Parameter group 8-3* FC
Port Settings
69 Parameter group 8-3* FC
Port Settings
58 | Danfoss A/S © 2019.12
4
39 42 50 53 54 55
Default Description
Setting
– Integrated RC-filter for cable shield. ONLY for connecting the shield if EMC
problems exist.
– RS485 interface. A switch (BUS TER.) is provided on the control card for bus
termination resistance. See
–
2 Digital input/output terminals
illustration 39.
Electrical Installation
AQ275652476278en-000101 / 130R0709