Power-Off Procedure - Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual

Server node
Hide thumbs Also See for FusionServer Pro XH321 V5 V100R005:
Table of Contents

Advertisement

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide

8.3.2 Power-Off Procedure

The server node can be powered off in any of the following ways:
Issue 07 (2019-12-20)
iv.
Click Yes.
Use the iBMC CLI.
i.
Log in to the iBMC CLI.
For details, see
ii.
Run the following command:
ipmcset -d powerstate -v 1
iii. Type y or Y and press Enter.
Use the Remote Virtual Console.
i.
Log in to the Remote Virtual Console.
For details, see
ii.
On the KVM screen, click
iii. Select Power On.
A dialog box is displayed.
iv.
Click Yes.
● Powering off a server node will interrupt all services and programs running on it.
Therefore, before powering off a server node, ensure that all services and programs
have been stopped or migrated to other server nodes.
● The "power-off" mentioned here is an operation performed to change the server node
to the standby state (the power indicator is steady yellow).
● After a server node is powered off forcibly, wait for more than 10 seconds for the server
node to power off completely. Do not power on the server node again before it is
completely powered off.
● Forced power-off may damage user programs or unsaved data. Exercise caution when
performing this operation.
Power off the chassis.
The server node will be powered off along with the chassis.
When the server node is in power-on state, pressing the power button on the
server node front panel can power off the server node gracefully.
If the server node OS is running, shut down the OS according to the onscreen
instructions.
For details, see
2.1.2 Indicators and
When the server node is in power-on state, holding down the power button
on the server node front panel for six seconds can power off the server node
forcibly.
For details, see
2.1.2 Indicators and
Use the iBMC WebUI.
a.
Log in to the iBMC WebUI.
Copyright © Huawei Technologies Co., Ltd.
10.4 Logging In to the
10.3 Logging In to the Desktop of a
or
on the toolbar.
Buttons.
Buttons.
8 Parts Replacement
CLI.
Server.
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusionserver pro xh321 v5V100r005

Table of Contents