FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
For details, see
----End
8.4.21 Removing the PCIe Riser Module
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the PCIe riser module.
Step 5 Remove the PCIe riser modules.
1.
2.
3.
4.
Step 6 Disconnect the cable between the PCIe card and the NC-SI port.
For details, see
Issue 07 (2019-12-20)
8.3.1 Power-On
8.3.2 Power-Off
8.3.3 Removing an XH321
Use a Phillips screwdriver to loosen the screws on the cover of the server
node. See (1) in
Figure
Remove the cover from the server node in the arrow direction. See (2) in
Figure
8-61.
Use a Phillips screwdriver to loosen the screw that secures the PCIe riser
module. See (3) in
Figure
Lift the PCIe riser module in the arrow direction. See (4) in
Figure 8-61 Removing the PCIe riser module
7.4 PCIe Card
Copyright © Huawei Technologies Co., Ltd.
Procedure.
Procedure.
V5.
8-61.
8-61.
Cabling.
8 Parts Replacement
Figure
8-61.
91