Installing The Avago Sas3004Imr Pcie Raid Control Card - Huawei FusionServer Pro CH121 V5 User Manual

FusionServer Pro CH121 V5 Compute Node
User Guide
2.
----End

5.2.3 Installing the Avago SAS3004iMR PCIe RAID Control Card

Procedure
Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Remove the air duct.
For details, see
Step 6 Take the spare part out of its ESD bag.
Step 7 Determine the position of the Avago SAS3004iMR RAID controller card.
Step 8 Install the Avago SAS3004iMR RAID controller card.
For details, see
Step 9 Install the M.2 FRU on the Avago SAS3004iMR RAID controller card.
For details, see
Controller
Step 10 Install the air duct.
For details, see
Step 11 Install the cover.
For details, see
Step 12 Install the compute node.
For details, see
Step 13 Power on the compute node.
For details, see
----End
Issue 06 (2019-08-10)
Activate RAID.
For details, see LSI SAS3008IR> Common Tasks (Legacy/Dual Mode) > Activating a
RAID Configuration in
3.1 Power-Off
3.3 Removing a CH121
3.5 Removing the
3.7 Removing the Air
3.12 Installing a PCIe
5.2.4 Installing an M.2 FRU on the Avago SAS3004iMR PCIe RAID
Card.
3.8 Installing the Air
3.6 Installing the
3.4 Installing a CH121
3.2 Power-On
Copyright © Huawei Technologies Co., Ltd.
Huawei V5 Server RAID Controller Card User
Procedure.
V5.
Cover.
Ducts.
Card.
Duct.
Cover.
V5.
Procedure.
5 Optional Part Installation
Guide.
97