Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual page 127

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 10-14 PuTTY Configuration
Step 7 Set Close window on exit to Only on clean exit.
Step 8 Click Open.
The PuTTY screen is displayed. Then the message "login as:" is displayed,
prompting you to enter a user name.
Step 9 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the
prompt.
----End
Issue 07 (2019-12-20)
Set Saved Sessions and click Save. You can double-click the saved record in Saved Sessions
to log in to the server next time.
● If this is your first login to the server, the PuTTY Security Alert dialog box is displayed.
Click Yes to proceed.
● If an incorrect user name or password is entered, you must set up a new PuTTY session.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
119