FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 8 Place the removed component in an ESD bag.
Step 9 Install a processor socket cover.
1.
2.
Issue 07 (2019-12-20)
Figure 8-35 Removing a processor (2)
Clean the removed processor and put it into an ESD bag.
● Perform this operation only when a processor is not installed immediately.
● The processor socket cannot be exposed and must be covered by a processor or cover
during transportation and storage.
Aligning the processor socket cover with the guide pin on the processor
socket, place the cover on the processor socket. See (1) in
Press the positions shown by (2) in
Copyright © Huawei Technologies Co., Ltd.
Figure 8-36
until you hear a click.
8 Parts Replacement
Figure
8-36.
70