FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 8-27 Positions and slots of the M.2 FRUs
Step 2 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
1.
2.
Figure 8-28 Removing an M.2 FRU
Step 3 Place the removed component in an ESD bag.
Step 4 Install an M.2 FRU filler module to shield the EMC.
----End
8.4.10 Installing an M.2 FRU on the Avago SAS3004iMR PCIe
RAID Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
Issue 07 (2019-12-20)
Open the handle of the M.2 FRU. See (1) in
Remove the M.2 FRU. See (2) in
Perform this step only when an M.2 FRU is not installed immediately.
Copyright © Huawei Technologies Co., Ltd.
Figure
8-28.
Figure
8-28.
8 Parts Replacement
65