Removing The Raid Controller Card From The Mainboard - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Step 4 Hold the system battery with the side marked with text facing upwards, insert the left end of
the system battery into the slot, and gently press down the system battery until it is properly
installed in the slot. See
Figure 7-56 Installing the system battery
Step 5 Install the chassis cover. For details, see
Step 6 Install the 5288 V3. For details, see
Step 7 Connect all internal cables such as power and network cables. For details, see
External
Step 8 Power on the 5288 V3. For details, see
----End
7.29 Removing the RAID Controller Card from the
Mainboard
Remove a RAID controller card before replacing it with a new one. The appearance and
position of a RAID controller card may vary according to models, but the removal method is
the same.
Issue 26 (2018-11-19)
Figure 7-56.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
Cover.
3.5 Connecting
Server.
170