FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
----End
8.4.12 Installing a Processor
● Only Huawei technical support or personnel authorized by Huawei can install
● Do not wear ESD gloves during processor replacement. The gloves may catch
● The same model of processors must be used in a server.
● Before installing a processor, clean the surface of the processor, the heat sink,
Procedure
Step 1 Power off the server node.
For details, see
Issue 07 (2019-12-20)
Figure 8-36 Installing a CPU socket cover
NO TICE
the processors from Huawei servers.
on pins on the processor socket and damage it.
and the processor carrier. If there is residual thermal compound, use a tissue to
clean it.
8.3.2 Power-Off
Copyright © Huawei Technologies Co., Ltd.
Procedure.
8 Parts Replacement
71