Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual page 53

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 8-3 Removing the multi-port cable
Step 4 Remove the optical cables and modules.
● Replacing the optical cable, network cable, or optical module will interrupt
● Wear ESD gloves or an ESD wrist strap when using die-casting pliers to replace
● Do not exert too much force when using the die-casting pliers to prevent
1.
2.
Issue 07 (2019-12-20)
NO TICE
services.
optical or network cables or optical modules.
damage to the optical or network cables or optical modules.
Use the die-casting pliers to clamp the optical cable connector and remove it
from the port.
Figure 8-4 Removing optical cables using die-casting pliers
Use the die-casting pliers to clamp the optical module, unlock the security
pin, and remove the optical module.
Copyright © Huawei Technologies Co., Ltd.
8 Parts Replacement
45